Technology Leader and Total Integrated Solution Provider
Electromagnetic Flow Meter
Electromagnetic flow metering is one of the oldest & most widely used across the industries. Magnetic flow meters are reliable & cost effective water flow measurement technology available.

We are proud to be associated with Shenitech, LLC to bring this flow measurement technology for water flow measurement application. These flow meters work on Faraday’s Law principle which depends on the conductivity of media. Our magnetic flow meters are used for domestic as well as industrial water flow application having high TDS, in Sewerage treatment & effluent treatment application.
Faraday’s Law principle is annotated as below.
“When a charged media moves in a direction which is perpendicular to the direction of magnetic field an electromagnetic flux is generated which is perpendicular to the direction of both motion of charged media & magnetic field & directly proportional to the mean velocity of charge particle & magnetic field.”
Suppose ‘D’ is the diameter of flow cell of the flow meter, ‘B’ is the magnetic field produced by the magnetically coupled coil, mounted on the side of meters inside coil housing & flow media moving unidirectional with velocity ‘v’ , then EMF generated ‘E’ is related to velocity as
E = BDv      Or      v = E/ (BD)
Cross section area of pipe is ‘A’
Then Flow rate ‘Q’ can be calculated as
Q = Ax E/ (BD)
Benefits & Features:
No moving parts
Can operate for conductivity as low as 5 µS/cm
High Accuracy as high as ± 1% & large flow range 1200:1
CE Approved
A large selection of liner like PTFE, Neoprene, PFA etc.
Electrode material selection
Low pressure drop
We have both integral type & remote type sensors option available as far as mounting is considered. The sensor selection is generally depend upon the application & site conditions. We recommend you to take our expert advice before making selection of appropriate sensor.
Technical Specification:
Accuracy: ± 0.5%
Damping Time 0.2~100s selectable
Analog Output: Bi-directional, isolated 0~10mA/4~20mA.
Protection Class: For electronic box IP65 (outdoor) or IP 67 (optional)
Lining Material: Rubber, PTFE, Polyurethane, PFA
Electrode Type: General type, scraper type or replaceable type
Electrode Material: 316L SS, Hastelloy B, Hastelloy C, Titanium, Tantalum
Sensor Material: Measuring tube Stainless steel
Medium Temperature: Integral type -10°C~+80°C (14°F~176°F)
                                            Remote type -10°C~+150°C (14°F~302°F)
Conductivity: ≥ 5us/cm
Measuring Range 1200:1, flow rate ≤12m/s (39ft/s)
Power Supply
Structure Type Integral type, remote type, submersible type
About Us
Enquiry Form
Contact Us
Flow Meters
BTU Meters
Variable Air Volume Boxes (VAV)
Water Quality Analysers
Control Valves & Actuators
Manual Valves
Field Sensors
Building Management Solutions
Flow Metering Solutions
Heat Metering Solutions
Water & Waste Water Treatment
Firefighting & Plumbing
Basement Ventilation Solutions
Triton Process Automation
Swastic Disa Corporate Park,
Opp. Shreyas Theater, LBS Road,
Ghatkopar (West),
IMumbai-400086. INDIA
+91 22 2500 1900
+91 22 23474771
  © Triton Process Automation Pvt. Ltd. All Rights Reserved (Terms of Use)